DCDIAG

Discussion:

DCDIAG

(too old to reply)

Venkat

2010-07-01 10:40:07 UTC

I am trying to use dcdiag on a Windows Server 2008 R2 Server Core without
success. I have copied the DCDIAG.exe file from a Windows Server 2008 R2
Full Server to the server core machine and tried to run, however it fails
with an error as show below:

c:\Windows\System32>dcdiag /?
Resource ID 0x604 not found.
Unable to print Resource ID 0x604 .
Unable to print Resource ID 0x604 .
Resource ID 0x605 not found.
Unable to print Resource ID 0x605 .
Unable to print Resource ID 0x605 .
Resource ID 0x606 not found.
Unable to print Resource ID 0x606 .
Unable to print Resource ID 0x606 .
Resource ID 0x608 not found.
Unable to print Resource ID 0x608 .
Unable to print Resource ID 0x608 .
Resource ID 0x60a not found.
Unable to print Resource ID 0x60a .
Unable to print Resource ID 0x60a .
Resource ID 0x62a not found.
Unable to print Resource ID 0x62a .
Unable to print Resource ID 0x62a .
Advertising
Message 0xc0001839 not found.

CheckSDRefDom
Message 0xc000183a not found.

CheckSecurityError
Message 0xc000183b not found.
Resource ID 0x62d not found.
Unable to print Resource ID 0x62d .
Unable to print Resource ID 0x62d .

However if i map a drive from Server Core machine to the Windows Server 2008
R2 machine and then run dcdiag from the mapped drive it runs fine.

I want to use dcdiag to run some tests before promoting a server core
machine to a DC. The command i want to run is dcdiag /Test:dcpromo
/DnsDomain:<DomainName> /NewForest

Please let me know how i can use the copied dcdiag on server core. Is there
any dll registeration that needs to be done??

Meinolf Weber [MVP-DS]

2010-07-01 10:55:41 UTC

Permalink

Hello Venkat,

Did you also copy the corresponding dcdiag.exe.mui file? You should have
dcdiag.exe located in C:\windows\system32 and C:\windows\syswow64 and dcdiag.exe.mui
in C:\windows\system32\en-us and C:\windows\syswow64\en-us or your language
fodlers.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Post by Venkat
I am trying to use dcdiag on a Windows Server 2008 R2 Server Core
without success. I have copied the DCDIAG.exe file from a Windows
Server 2008 R2 Full Server to the server core machine and tried to
c:\Windows\System32>dcdiag /?
Resource ID 0x604 not found.
Unable to print Resource ID 0x604 .
Unable to print Resource ID 0x604 .
Resource ID 0x605 not found.
Unable to print Resource ID 0x605 .
Unable to print Resource ID 0x605 .
Resource ID 0x606 not found.
Unable to print Resource ID 0x606 .
Unable to print Resource ID 0x606 .
Resource ID 0x608 not found.
Unable to print Resource ID 0x608 .
Unable to print Resource ID 0x608 .
Resource ID 0x60a not found.
Unable to print Resource ID 0x60a .
Unable to print Resource ID 0x60a .
Resource ID 0x62a not found.
Unable to print Resource ID 0x62a .
Unable to print Resource ID 0x62a .
Advertising
Message 0xc0001839 not found.
CheckSDRefDom
Message 0xc000183a not found.
CheckSecurityError
Message 0xc000183b not found.
Resource ID 0x62d not found.
Unable to print Resource ID 0x62d .
Unable to print Resource ID 0x62d .
However if i map a drive from Server Core machine to the Windows
Server 2008 R2 machine and then run dcdiag from the mapped drive it
runs fine.
I want to use dcdiag to run some tests before promoting a server core
machine to a DC. The command i want to run is dcdiag /Test:dcpromo
/DnsDomain:<DomainName> /NewForest
Please let me know how i can use the copied dcdiag on server core. Is
there any dll registeration that needs to be done??

Venkat

2010-07-01 11:15:07 UTC

Permalink

Bingo!!!
Thanks Meinolf

Post by Meinolf Weber [MVP-DS]
Hello Venkat,
Did you also copy the corresponding dcdiag.exe.mui file? You should have
dcdiag.exe located in C:\windows\system32 and C:\windows\syswow64 and
dcdiag.exe.mui in C:\windows\system32\en-us and C:\windows\syswow64\en-us
or your language fodlers.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Meinolf Weber [MVP-DS]

2010-07-01 11:20:07 UTC

Permalink

Hello Venkat,

You're welcome.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Post by Venkat
Bingo!!!
Thanks Meinolf

Post by Meinolf Weber [MVP-DS]
Hello Venkat,
Did you also copy the corresponding dcdiag.exe.mui file? You should
have dcdiag.exe located in C:\windows\system32 and
C:\windows\syswow64 and dcdiag.exe.mui in C:\windows\system32\en-us
and C:\windows\syswow64\en-us or your language fodlers.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Post by Venkat
I am trying to use dcdiag on a Windows Server 2008 R2 Server Core
without success. I have copied the DCDIAG.exe file from a Windows
Server 2008 R2 Full Server to the server core machine and tried to
c:\Windows\System32>dcdiag /?
Resource ID 0x604 not found.
Unable to print Resource ID 0x604 .
Unable to print Resource ID 0x604 .
Resource ID 0x605 not found.
Unable to print Resource ID 0x605 .
Unable to print Resource ID 0x605 .
Resource ID 0x606 not found.
Unable to print Resource ID 0x606 .
Unable to print Resource ID 0x606 .
Resource ID 0x608 not found.
Unable to print Resource ID 0x608 .
Unable to print Resource ID 0x608 .
Resource ID 0x60a not found.
Unable to print Resource ID 0x60a .
Unable to print Resource ID 0x60a .
Resource ID 0x62a not found.
Unable to print Resource ID 0x62a .
Unable to print Resource ID 0x62a .
Advertising
Message 0xc0001839 not found.
CheckSDRefDom
Message 0xc000183a not found.
CheckSecurityError
Message 0xc000183b not found.
Resource ID 0x62d not found.
Unable to print Resource ID 0x62d .
Unable to print Resource ID 0x62d .
However if i map a drive from Server Core machine to the Windows
Server 2008 R2 machine and then run dcdiag from the mapped drive it
runs fine.
I want to use dcdiag to run some tests before promoting a server
core machine to a DC. The command i want to run is dcdiag
/Test:dcpromo /DnsDomain:<DomainName> /NewForest
Please let me know how i can use the copied dcdiag on server core.
Is there any dll registeration that needs to be done??